Use this guide to find which diameter and types of Plastic Filament are compatible with your 3D Printer. Your 3D Printer most likely recommends a certain combination of Plastic Filament Diameter and Material, though other materials may be supported. If your printer is known to support ABS and PLA, they will be listed in this chart.
For more information see The Differences Between ABS and PLA for 3D Printing.
This guide is provided as is and only to be used as a reference, please remember to also check the documentation for your 3D Printer regarding correct Diameter and Material.
Please send additions or corrections to this list to content AT protoparadigm DOT com
| Printer | Diameter | Material(s) |
|---|---|---|
| 3D Touch | 3mm | ABS, PLA |
| Afinia H-Series | 1.75mm | ABS, PLA |
| Air Wolf 3D | 3mm | ABS, PLA |
| Aluminatis | 3mm | ABS, PLA |
| Bukobot | 3mm | ABS, PLA |
| Creatr | 1.75mm | ABS, PLA |
| Fablicator | 1.75mm | ABS, PLA |
| Felix 1.0 | 1.75 | PLA |
| Lulzbot AO-100 | 3mm | ABS, PLA |
| M2 | 1.75mm | ABS, PLA |
| mbot | 1.75mm | ABS, PLA |
| Orca | 1.75mm | ABS, PLA |
| Printrbot | 3mm | ABS, PLA |
| Printrbot JR | 3mm | PLA |
| Replicator | 1.75mm | ABS, PLA |
| Replicator 2 | 1.75mm | PLA |
| Replicator 2X | 1.75mm | ABS, PLA |
| RepRap Pro | 1.75mm | ABS, PLA |
| SeeMeCNC H1.1 | 1.75mm | ABS, PLA |
| Solidoodle 2 | 1.75mm | ABS, PLA |
| Solidoodle 3 | 1.75mm | ABS, PLA |
| Tantillus | 3mm | PLA |
| Type A Series 1 | 1.75mm | ABS, PLA |
| Ultimaker | 3mm | PLA |
| UP! Plus | 1.75mm | ABS, PLA |
| Rapman | 3mm | ABS, PLA |
| Xeed | 1.75mm | ABS, PLA |
The Makertbot Replicator 2X uses 1.75mm filaments, not 3mm.
http://store.makerbot.com/replicator2x.html
You are absolutely right. I'm not sure how we overlooked that mistake. Thanks for pointing it out!